Control
Motionblinds 可与 Control4 一起使用
Motionblinds 电机可与领先的智能家居自动化系统 Control4 无缝协作。通过本地驱动程序支持，可以毫不费力地集成百叶帘和窗帘，实现与照明、气候和安全功能的同步控制。
What is Control4?
Control4 is a professional smart home and building automation platform developed by Snap One. It is designed for installation by certified dealers and integrators, and is used in high-end residential properties, multi-dwelling units (MDUs), and commercial buildings worldwide. Control4 OS 3 is the current operating system, integrating lighting, climate, security, entertainment, and motorized window coverings into a single unified system.
Control4 supports third-party device integration through a driver-based architecture. Drivers are software modules that allow Control4 to communicate with and control devices from other manufacturers — including Motionblinds motors — without custom programming. The Motionblinds driver for Control4 is developed by Intrinsic Dev and enables full control of Motionblinds motors through the Control4 interface.
本地 API 和 Wi-Fi 桥接器
Motionblinds Integration 可 通过 Motionblinds Wi-Fi 桥接器（CM-55, CM-20 和 CMD-01） 以蓝牙和 433MHz 技术 控制 Motionblinds 电机 。使用时，只需将 Motionblinds Integration 与其中一个 Wi-Fi 桥接器一起 安装即可 。
干接点连接器
配备 了 干接点连接器 技术的 Motionblinds 电机 可 通过盲板 执行器进行 控制。 支持的 控制模式 包括
-
机械 模式 （默认）
-
脉冲 模式
-
带 停止功能的 脉冲 模式
-
单 按钮 模式
通过与 KNX 兼容的 执行机构 ，可实现 灵活 可靠的 操作 。
机械马达
Motionblinds 机械电机可通过百叶窗开关或百叶窗执行器（如 ABB SAH/S 8.6.7.1）直接控制。 主要 特点
-
适用于 全开/全关操作 。
-
中间 停止点是 可能的，但 不能 按 百分比 精确 控制 。
-
在 多 盲板安装中 ， 可能会 出现微小 的变化，影响 各窗 之间的 完美 对齐 。
Control4 — Frequently asked questions
Yes. Motionblinds motors integrate with Control4 via three methods: (1) the Motionblinds driver for Control4, developed by Intrinsic Dev, which controls Bluetooth and 433MHz RF motors via a Motionblinds Wi-Fi bridge over the local API; (2) Dry Contact integration via blind actuators; and (3) mechanical motor control via shutter switches or blind actuators.
The Motionblinds driver for Control4 is a software module developed by Intrinsic Dev that enables Control4 to communicate with and control Motionblinds motors through the Motionblinds local API. The driver is installed alongside a Motionblinds Wi-Fi bridge (CM-55, CM-20, or CMD-01) and makes all connected motors available in the Control4 interface for scenes, schedules, and automations.
The Motionblinds driver for Control4 is available from Intrinsic Dev at intrinsicdev.com.
The Motionblinds driver for Control4 supports the CM-55, CM-20, and CMD-01 Wi-Fi bridges. Each bridge connects to the local network and allows Control4 to control all Motionblinds motors connected to that bridge via the Motionblinds local API.
Yes. The Motionblinds driver communicates with the Wi-Fi bridge over the local network via the Motionblinds local API. No cloud connection is required. Motors remain fully controllable through Control4 even when there is no active internet connection.
Control4 supports three types of Motionblinds motor integration: (1) Bluetooth and 433MHz RF motors connected via a Motionblinds Wi-Fi bridge and the Motionblinds driver; (2) motors with Dry Contact technology, controlled via blind actuators or relay outputs; (3) mechanical 230V AC motors, controlled via shutter switches or blind actuators.
Dry Contact is a wired control interface on certain Motionblinds motors. It allows the motor to be triggered by a relay output, blind actuator, or switch — without requiring Wi-Fi, Bluetooth, or any smart home protocol. Motionblinds Dry Contact motors support four modes: mechanical mode, pulse mode, pulse mode with stop, and single button mode.
Motionblinds RF motors controlled via the Motionblinds driver support precise percentage-based positioning. Mechanical motors controlled via shutter switches or blind actuators support intermediate stops by time, but cannot be positioned by precise percentage — the motor runs for a set duration rather than to a measured position.
Control4 installations are carried out by certified Control4 dealers and integrators. The Motionblinds driver for Control4 is installed and configured by the dealer as part of the Control4 system setup.
Snap One is the parent company of Control4. Snap One acquired Control4 in 2019 and merged with SnapAV in the same year. Snap One provides professional AV and smart home integration products and platforms, with Control4 as its flagship smart home automation operating system.
